What do you need to pay attention to when using horizontal scutters?

Horizontal slitter is a commonly used cutting equipment, widely used in paper, cardboard, tape, plastic film and other materials slitter work. When using a horizontal scutcher, the following matters need to be paid attention to to ensure the safety and effectiveness of the operation.

1, the preparation of the equipment before using the horizontal slitting machine, you must ensure that the equipment is in good running condition. First, check whether the electrical connection of the device is firm and whether the power supply is normal. Then it is necessary to check whether the mechanical parts of the machine, including the blade, clamping device, guide device, etc., are working properly. If any abnormality is found, it should be repaired or replaced in time.

2, safety protection measures When using horizontal scuttling, must strictly abide by the relevant safety operation regulations. First of all, safety gloves and goggles should be worn to avoid possible hazards when cutting. In addition, set up warning signs and safety barriers to ensure the safety of people around. At the same time, it should be ensured that the working area of the cutting machine is clean and tidy, and there are no other obstacles.

3, the selection of cutting materials In the use of horizontal slitter, it is necessary to choose the appropriate cutting materials according to the actual needs. The first thing to consider is the size and thickness of the material, as well as other physical properties. According to different material characteristics, you can choose different shapes and materials of cutting tools, in order to obtain the best cutting effect.

4, the setting of machine parameters In the use of horizontal scuttling machine, you need to set the appropriate machine parameters according to the nature and requirements of the cutting material. The first is the adjustment of the cutting speed, according to the thickness and hardness of the material, the speed can be properly adjusted to ensure the cutting quality. The second is the adjustment of cutting pressure, adjusting the contact force between the blade and the material to adapt to different materials.

5, the monitoring of the cutting process In the use of horizontal slitting machine, you need to pay close attention to the cutting process. The first is to observe the wear of the cutting blade. If the blade is found to be seriously worn, the blade should be replaced in time to ensure the cutting quality. The second is to observe the cracks and edge quality of the cutting material, if the quality is not ideal, the machine parameters should be adjusted or the appropriate cutting tool should be selected.

6, the maintenance of the equipment after using the horizontal slitter for a period of time, the maintenance of the equipment needs to be carried out. The first is to regularly clean the working area of the cutting machine and the cutting blade to remove dust and impurities. The second is to lubricate the mechanical parts of the machine to reduce wear and friction. In addition, it is necessary to regularly check the electrical connections and safety devices of the equipment to ensure the normal operation of the equipment.

7, to prevent accidents in the use of horizontal slitter, special attention should be paid to avoid accidents. First, it is forbidden to place hands or other body parts near the cutting area to prevent cutting. Secondly, pay attention to avoid excessive accumulation of materials and avoid dangerous tilting or sliding of materials. In addition, focus and stability should be maintained when cutting to avoid cutting deviation or sputtering.

In short, in the use of horizontal scutters, it is necessary to strictly comply with the relevant safety operation regulations, set the appropriate machine parameters, monitor the cutting process, and regularly carry out equipment maintenance. Only by ensuring the safety and effectiveness of the operation, can the cutting work be better completed.